Citizen iDP-460 User Manual page 54

[Initial Value]
[Sample Program]
[See Also]
ESC h (n) ;
[Name]
[Code]
[Domain]
[Function]
[Caution]
[Initial Value]
[See Also]
The characters are printed after the LF command is received in the
42-columns mode.
When setting the right margin to 10
ESC e 10 ; LPRINT CHR$(&H1B)+"e10;";
<1B>H<65>H<31>H<30>H<3B>H
S0, S1, RS, US
Select Character Set
<1B>H<68H>(n)<3B>H
0 (n) 10 (<30>H n <39>H)
This command selects the character sets of the countries listed below, depending on the
n-value.
n Function
0 U.S.A.
1 France
2 Germany
3 U.K.
4 Denmark I
5 Sweden
Be sure to add ";"(<3B>H) to the end of the parameter.
character sets replace part of characters.
this command will be ignored.
n = 0
11.2 International Character Codes List
n Function
6 Italy
7 Spain
8 Japan
9 Norway
10 Denmark II
If the n-value is specified beyond the limits,
40
iDP-460 User's Manual
ALL
As shown separately, the
CITIZEN