Settings - Lincoln Electric VRTEX 360 COMPACT Operator's Manual

VRTEX 360 COMPACT OPERATION (INSTRUCTOR MODE)
®
UPDATE SOFTWARE
Selecting this option loads a newer version of the software if one is
available on a USB inserted in the front of the machine. Updating to a
different version may shut down or restart the system.
After updating, the system may need to be shut down and restarted
for changes to be implemented.
UPDATE CONFIGURATION FILE
Selecting this option loads any configuration changes from the
USB inserted in the front of the machine. This is used for part
replacement.

SETTINGS

The options screen, in the instructor mode, allows the user to change
the volume of the user interface and welding sounds, date and time
settings and sensor settings (magnetic frequency ID). See Figure
77. The options screen also allows the user to view the status of any
connected devices. Selecting the yellow DEVICE STATUS icon will
display the connection status of each device. Properly connected
devices will display a green checkmark and improperly or not
connected devices will be displayed with a red X. See Figure 78.
Figure 77 – Options
Figure 78 – Device status
34