Additional Features - Lincoln Electric VRTEX 360 COMPACT Operator's Manual

VRTEX 360 COMPACT
®

ADDITIONAL FEATURES

WELDING WITHOUT THE HEADGEAR
Designed to allow users the ability to weld without being totally
immersed inside the virtual environment.
Users now have the option to view the welding process in the virtual
reality headgear, or choose instead to use the Auto Camera and
positioning on the touchscreen monitor.
To disengage the headset the user will need to follow a few simple
steps.
1. Administrator Access Screen.
2. Enter the passkey code. The unchanged generic code is
1-2-3-4-5. Press the unlocked padlock.
3. Inside Administrator Access press Settings.
4. Inside settings un-check Enable VR Device. Users will be
prompted to SHUTDOWN and restart. To enable the headgear
follow the same steps, except this time the user will press the box
to check VR Enabled.
5. Users can disconnect the helmet when not in use. It is
recommended that any disconnect/connect be done with the
machine power off.
2
4
Figure 82
5
35
OPERATION
Figure 79
1
Figure 80
Figure 81
3