Battery Removal - Remington X6 POWER-X Series Manual

MICRO FADE ADJUSTABLE COMB
• The micro fade adjustable comb allows precision cutting in the 1 to
5mm range.
• Use the adjustment dial to set the comb to the desired length.
AUTO TURBO SYSTEM
• When switched on, your clipper runs in normal mode. The Auto Turbo
feature will automatically activate when the clipper senses it needs
more power.
• To run in Turbo mode, slide the on/off switch to the turbo position.

BATTERY REMOVAL

We strongly recommend that a professional removes the rechargeable
battery. Parts of the shaver case, and tools have sharp edges and may
cause injury if not handled correctly.
• The battery must be removed from the appliance before it is scrapped.
• The appliance must be disconnected from the supply mains when
removing the battery.
• Ensure that the battery is fully discharged. To do this, operate the
device until it stops.
• Pry off and remove the top panel.
• Using a small screwdriver, unscrew 2 screws from the top housing.
• Pry off and remove the top housing.
• Unscrew the 3 screws on the inner housing then remove the inner housing.
• Remove the battery assembly.
• Cut the battery tabs and remove the battery from bracket.
• The battery must be disposed of at an appropriate official recycling/
collection point.
• Do not attempt to operate the trimmer once you have opened it.
DISPOSAL/RECYCLING
Legislation in some localities mandates that e-waste (anything with a plug,
battery or cord) is disposed of through controlled recycling facilities and
must not be disposed of in general household waste. For more information
about recycling of electrical and battery operated appliances, please
contact your local council or your local household waste disposal service.
This product conforms to radio frequency interference requirements
Any product purchased and used commercially carries a limited 90 Day Warranty.
This product is not suitable for bath or shower.