Remington X6 POWER-X Series Manual page 6

During corded use:
When the unit is plugged in, the corded indicator
icon will show ( ). Normal operating speed:
When the unit is plugged in, the corded indicator
icon will show ( ). Turbo mode:
During cordless use:
The display will show the remaining run time in
minutes. When the run time reaches 5 minutes it
will flash.
When in turbo mode, the display will be the same
as above with the turbo symbols (>>>)
• The clipper comes with a quick charge function, 10 minutes charging
will give an emergency burst of run time.
CHARGING VIA STANDARD ELECTRICAL SOCKET
• Ensure the product is switched off.
• Connect the charging adaptor to the product and then to the mains.
USB
• Connect Micro USB to the appliance, and the USB connector to any
standard USB port or charger
• Product will only charge through USB and will not run in corded mode.
CORDED USE
• Connect the charging adaptor to the product then to the mains.
Note: Extended mains only use will result in the reduction of the battery life.
CORDLESS USE
• When the product is switched on and fully charged it can be used in
cordless mode for up to 90 minutes.
6