Table of Contents Table of Contents 1. Before You Begin ............................1 What Is Included ................................1 Claims ......................................1 Manual Conventions ..................................1 Symbols ....................................... 1 Product at a Glance ................................. 2 Safety Notes ..................................2 Personal Safety .................................... 2 Mounting and Rigging ..................................
Page 4
Table of Contents 6. Technical Specifications ......................... 23 Contact Us ..................................24 Q-Spot™ 360-LED User Manual Rev. 4...
Failure to report damage to the carrier immediately may invalidate your claim. In addition, keep the box and contents for inspection. For other issues, such as missing components or parts, damage not related to shipping, or concealed damage, file a claim with CHAUVET® within 7 days of delivery. Manual Conventions Convention...
· In case of a serious operating problem, stop using this product immediately! In the unlikely event that your CHAUVET® product may require service, contact CHAUVET® Technical Support. LEDs gradually decline in brightness over time, mostly because of heat. Packaged in...
Introduction 2. Introduction Product The Q-Spot™ 360-LED is a high-power, moving-yoke product equipped with 3 10-watt white LEDs. This product includes a color wheel with 7 colors, plus white, and 2 gobo wheels. Gobo Description wheel #1 has 8 fixed gobos plus open. Gobo wheel #2 has 7 rotating slot-n-lock gobos plus open.
Technical Specifications. The listed current rating indicates the maximum current draw during normal operation. For more information, you may download Sizing Circuit Breakers from the CHAUVET® website: www.chauvetpro.com. Always connect this product to a protected circuit with an appropriate electrical ground to avoid the risk of electrocution or fire.
If you are not familiar with or need more information about DMX standards, Master/Slave connectivity, or the DMX cables needed to link this product to a DMX controller, download Primer from CHAUVET® website: www.chauvetpro.com. Q-Spot™ 360-LED User Manual Rev. 4...
Setup Gobo Wheels The Q-Spot™ 360-LED includes two gobo wheels. Gobo wheel #1 has 8 fixed gobos, while gobo wheel #2 has 7 rotating gobos. The diagrams show each wheel, as per the DMX Values tables. Color Wheel The Q-Spot™ 360-LED includes one color wheel with 7 fixed colors. The diagram shows the color on the wheel, as per the DMX Values tables.
Setup Gobo Replacement 1. Turn the product off and disconnect from power. 2. Unlock the gobo cover and slide it away. 3. Separate the gobo plate away from the gobo wheel by pushing it toward the front of the moving head (direction 1 in the diagram). Be careful not to push the gobo out of the gobo plate.
Orientation Always mount this product in a safe position and make sure there is adequate room for ventilation, configuration, and maintenance. CHAUVET® recommends using the following general guidelines when mounting this Rigging product. · When selecting an installation location, consider easy access to this product for operation, programming adjustments, and routine maintenance.
Operation 4. Operation Control Panel Button Function Description <MENU> Exits from the current menu or function <ENTER> Enables the currently displayed menu or sets the currently selected value in to the current function <UP> Navigates upward through the menu list and increases the numeric value when in a function <DOWN>...
Operation Product Settings Pan/Tilt Speed 1. Select SETTINGS > PERFORM > PT SPEED. a. Select FAST for fast movement or SLOW to use the normal speed. b. Press <ENTER>. Reverse Pan Direction 1. Select SETTINGS > PERFORM > PAN INV. 2.
Operation Lockout 1. Select SETTINGS > PERFORM > KEY LOCK. 2. To choose activate the password function on the control panel, press <ENTER>. a. Select YES or NO. b. Press <ENTER>. Homepage Setting 1. Select SETTINGS > PERFORM > HOMEPAGE. 2.
Operation Custom Programming 1. Select RUNMODE > EDIT > STEP. 2. Select 01~49, press <ENTER>. a. Select PAN, press <ENTER>. i. Set 000~255 to assign the Pan position. b. Select TILT, press <ENTER>. i. Set 000~255 to assign the Tilt position. c.
Operation Manual Control 1. Select MANUAL > DMXvalue. a. Select PAN, press <ENTER>. i. Set 000~255 to assign the Pan position. b. Select TILT, press <ENTER>. i. Set 000~255 to assign the Tilt position. c. Select COLOR, press <ENTER>. i. Set 000~255 to assign the Color Wheel value. d.
Operation Menu Map Main Level Programming Levels Description ADDRESS 001~512 Selects a starting DMX address PERSON 1 Selects the 14-channel DMX mode PERSON PERSON 2 Selects the 11-channel DMX mode FAST PT SPEED Defines the pan/tilt speed SLOW NORM PAN INV Defines the direction of pan function INVERT NORM...
Operation Menu Map (cont.) Main Level Programming Levels Description DMX512 Selects DMX512-A running mode AUTO1 Selects the first automatic program AUTO2 Selects the second automatic program SOUND1 Selects the first sound-activated program SOUND2 Selects the second sound program CUSTOM Selects the user-customizable program TEST Selects the fixture’s test sequence SLAVE...
Operation DMX Values Person 1 Channel Function Value Percent/Setting 000 ó 255 0~540° 000 ó 255 Pan Fine Fine pan control 0~3° 000 ó 255 Tilt 0~270° 000 ó 255 Tilt Fine Fine tilt control 0~3° 000 ó 255 Pan/Tilt Speed Fast to Slow 000 ó...
Operation DMX Values (cont.) Person 1 Channel Function Value Percent/Setting 000 ó 060 360° Indexing 061 ó 150 Clockwise Rotation ~ Slow to Fast Gobo Wheel 2 Rotation 151 ó 165 No Function 166 ó 255 Counter-Clockwise Rotation ~ Slow to Fast 000 ó...
Operation DMX Values (cont.) Person 2 Channel Function Value Percent/Setting 000 ó 255 0~540° 000 ó 255 Tilt 0~270° 000 ó 009 No Function 010 ó 019 020 ó 029 Green 030 ó 039 Yellow 040 ó 049 Blue 050 ó 059 Orange 060 ó...
Operation DMX Values (cont.) Person 2 Channel Function Value Percent/Setting 000 ó 060 360° Indexing 061 ó 150 Clockwise Rotation ~ Slow to Fast Gobo Wheel 2 Rotation 151 ó 165 No Function 166 ó 255 Counter-Clockwise Rotation ~ Slow to Fast 000 ó...
Be prepared to provide the model number, serial number, and a brief description of the cause(s) for the return. The user must clearly label the package with an RMA number. CHAUVET® will refuse any product returned without an RMA number.
Technical Specifications 6. Technical Specifications Dimensions and Length Width Height Weight Weight 13 in (330 mm) 10.6 in (270 mm) 18.6 in (473 mm) 22 lbs (10 kg) Note: Dimensions in inches rounded to the nearest decimal digit. Electrical Power Supply Type Range Voltage Selection Switching (internal)
Contact Us World Headquarters United Kingdom and Ireland CHAUVET® CHAUVET® Europe Ltd. General Information General Information Address: 5200 NW 108th Avenue Address: Unit 1C Sunrise, FL 33351 Brookhill Road Industrial Estate Voice: (954) 929-1115 Pinxton, Nottingham, UK Fax: (954) 929-5560...