Applying Changes To Functions (Quick Instructions); Operating Modes - Chauvet LEG-3000 User Manual

Applying changes to Functions (Quick Instructions)

Unless other wise stated changes in the control board can be applied in the
following manner.
1. Press any of the [MENU] arrow buttons repeatedly until the display reads
the menu function you wish to change.
2. Press any one of the [SELECT] arrow buttons to activate menu function.
The display will show the current state of the function, either "Off" or "On"
with exception for DMX addressing and Lamp Time.
3. Press any one of the [SELECT] arrow buttons again to change the
currently selected setting.

Operating Modes

 DMX control mode will provide the greatest flexibility and creativity. Each fixture trait can be
controlled individually using any universal DMX-512 controller.
 Stand-alone mode using the optional CA-14 Wired Remote Controller.
DM X M ode
Operating in a DMX Control mode environment gives the user the greatest flexibility when it comes to
customizing or creating a show. You can tailor your programming to suit a specific event. Whether it
is a wedding where a spot light may be required or a lead singer requiring a color solo, the
opportunities are endless. In this mode you will be able to control each individual trait of the fixture
independently.
Da is y Ch ai n Conn e ct i on
1. Connect the (male) 3 pin connector side of the DMX cable to the output (female) 3 pin connector
of the first fixture.
2. Connect the end of the cable coming from the first fixture which will have a (female) 3 pin
connector to the input connector of the next fixture consisting of a (male) 3 pin connector. Then,
proceed to connect from the output as stated above to the input of the following fixture and so on.
LEG-3000 Manual
12
Daisy Chain Connection
Revision: 2006-01-20/16:03