Self Demonstration & Master/Slave - Chauvet LEG-3000 User Manual

Self Demonstration & Master/Slave
{    } – S elf - de mo
This function will execute the built-in program in the fixture.
F
UNCTION

{    } – De mo s pe ed
You can set the pace of the demo to either quick or fast.
F
UNCTION

{     } – Sou nd- Ac t i v e ( M ast e r/ S lav e)
In this mode the fixture can be set to run in a sound-activated mode in either a fast or slow pace.
Additionally, slave fixtures can all also be set to synchronize to the first fixture or in this case Master.
Please disconnect from the controller before enabling this function.
Requirements:
In the Legend 3000X the default 16-bit channel mode is required to be set. The Legend 3000X is
controlled using 14 channels.
F
UNCTION

F
UNCTION

M ast e r F i xt u re Se t t in gs
1. DMX address Ch 001
Set Aud.S or Aud.F to "On"
2.
Sl av e F ixt ur e Set t ing s
In a Master/Slave setup all slave fixtures following the master would be addressed the same. Please
follow the following instructions for all slave fixtures.
Legend 2000X: DMX address Ch 014, Aud.S or Aud.F set to OFF
Legend 3000X: DMX address Ch 015, Aud.S or Aud.F set to OFF
Important!
All Slave fixtures must have "Aud.S" or "Aud.F" set to off.
You must set "Aud.S" and "Aud.F" to off to regain DMX control of the fixture.
LEG-3000 Manual
S T N
ET O OTES
Off Normal
On Run self-demonstration
S T N
ET O OTES
Off Quick paced
On Slow paced
S T N
ET O OTES
Normal "Off"
Off
Sound-active slow pace
On
S T N
ET O OTES
Normal "Off"
Off
On Sound-active fast pace
16
Appendix
Revision: 2006-01-20/16:03