Dell EMC PowerEdge XR11 Installation And Service Manual page 76

Hide thumbs Also See for EMC PowerEdge XR11:
Table of Contents

Advertisement

Available languages

Available languages

Figure 66. Removing expansion card from Riser 1
NOTE:
The blue retention latch is only used when a half-length card is installed. If a shorter card is installed the blue
retention latch is not applicable.
Figure 67. Removing expansion card from Riser 2 and 3
3. For riser 2 and 3, using Phillip 2 screwdriver loosen the screw and pull the card to disconnect from the connector on the
expansion card riser.
76
Installieren und Entfernen von Systemkomponenten

Advertisement

Table of Contents
loading

Table of Contents