Systemabdeckung; Removing The System Cover - Dell EMC PowerEdge XR11 Installation And Service Manual

Figure 18. Installing the front bezel filter for Rear Accessed configuration
Next steps
Install the front bezel.

Systemabdeckung

Removing the system cover

Prerequisites
1. Follow the safety guidelines listed in the Safety instructions.
2. Follow the procedure listed in the Before working inside your system.
Steps
1. Using a 1/4-inch flat head or Phillips 2 screwdriver, rotate the lock counterclockwise to the unlock position.
2. Lift the release latch until the system cover slides back.
3. Lift the cover from the system.
Installieren und Entfernen von Systemkomponenten 33