Panasonic AK-SHB800G Operating Manual page 61

[SKIN DTL SETTING]
Item
[SKIN TONE DTL]
[ZEBRA] [ZEBRA]
[ZEBRA EFFECT
MEMORY]
[SKIN TONE EFFECT MEMORY]
[SKIN TONE CRISP]
[I CENTER]
[I WIDTH]
[Q WIDTH]
[Q PHASE]
Chapter 4 Menu Operations — Menu list (AK-SHU800)
Enables/disables the skin tone detail function.
[OFF], [ON]
f Factory setting: [OFF]
Enables/disables the zebra display.
[OFF], [ON]
f Factory setting: [OFF]
Selects the table of the zebra display.
[A], [B], [C], [A+B], [A+C], [B+C], [A+B+C]
f Factory setting: [A+B+C]
Selects the skin tone table used to apply the skin tone detail.
[A], [B], [C], [A+B], [A+C], [B+C], [A+B+C]
f Factory setting: [A+B+C]
Adjusts the skin tone detail.
[0]...[16]
f Factory setting: [16]
Sets the center position on the I axis (the area where the skin tone effect is applied).
[0]...[255]
f Factory setting: [87]
Sets the width of the area where the skin tone effect is applied on the I axis with [I CENTER] being the
center.
[0]...[255]
f Factory setting: [20]
Sets the width of the area where the skin tone effect is applied on the Q axis with [I CENTER] being the
center.
[0]...[255]
f Factory setting: [43]
Sets the phase of the area where the skin tone effect is applied with the Q axis being the reference.
[0]...[359]
f Factory setting: [90]
– 61 –
Description of settings