Table of Contents
Advertisement
[SKIN DTL SETTING]
Item
[SKIN TONE DETAIL]
[SKIN GET]
—
[MEMORY SELECT]
[CURSOR]
[H POSITION]
[V POSITION]
[ZEBRA]
—
[ZEBRA EFFECT
MEMORY]
[SKIN TONE EFFECT MEMORY]
[SKIN TONE CRISP]
[I CENTER]
[I WIDTH]
[Q WIDTH]
[Q PHASE]
Chapter 4 Menu Operations — Menu list (AK-SHU800)
Enables/disables the skin tone detail function.
[OFF], [ON]
f Factory setting: [OFF]
Selects whether to automatically obtain the color saturation and hue information from the cursor position.
[NO], [YES]
Selects the skin tone table of the subject to apply the skin tone table to.
[A], [B], [C]
f Factory setting: [A]
Shows/hides the box cursor in the center of the screen.
[OFF], [ON]
f Factory setting: [OFF]
Adjusts the horizontal position of the cursor.
[0%]...[100.00%] (0.25% steps)
f Factory setting: [50.00%]
Adjusts the vertical position of the cursor.
[0%]...[100.00%] (0.25% steps)
f Factory setting: [50.00%]
Enables/disables the zebra display.
[OFF], [ON]
f Factory setting: [OFF]
Selects the table of the zebra display.
[A], [B], [C], [A+B], [A+C], [B+C], [A+B+C]
f Factory setting: [A+B+C]
Selects the skin tone table used to apply the skin tone detail.
[A], [B], [C], [A+B], [A+C], [B+C], [A+B+C]
f Factory setting: [A+B+C]
Adjusts the skin tone detail.
[0]...[16]
f Factory setting: [16]
Sets the center position on the I axis (the area where the skin tone effect is applied).
[0]...[255]
f Factory setting: [87]
Sets the width of the area where the skin tone effect is applied on the I axis with [I CENTER] being the
center.
[0]...[255]
f Factory setting: [20]
Sets the width of the area where the skin tone effect is applied on the Q axis with [I CENTER] being the
center.
[0]...[255]
f Factory setting: [43]
Sets the phase of the area where the skin tone effect is applied with the Q axis being the reference.
[0]...[359]
f Factory setting: [90]
– 53 –
Description of settings
Advertisement
Table of Contents
