Table of Contents
Advertisement
[HLG SETTING]
Item
[BLACK GAMMA SW]
—
[MASTER BLACK
GAMMA]
[R BLACK GAMMA]
[B BLACK GAMMA]
[KNEE SW]
—
[KNEE POINT]
[KNEE SLOPE]
[PAINT (DC-HD)]
Adjust the images output from the <HD SDI OUT 1> and <HD SDI OUT 2> terminals. This is disabled, however, when pixels are set to 1080.
* Output is down converted to HD.
[PAINT SWITCH]
Item
[FLARE]
[GAMMA]
[BLACK GAMMA]
[KNEE]
[WHITE CLIP]
[DETAIL]
[SKIN TONE DTL]
[MATRIX]
[LINEAR MATRIX]
[COLOR CORRECT]
Chapter 4 Menu Operations — Menu list (AK-SHU800)
Enables/disables black gamma.
[OFF], [ON]
f Factory setting: [OFF]
Adjusts the gamma characteristic adjacent to black.
[−32]...[+32]
f Factory setting: [0]
Adjusts the gamma characteristic of red adjacent to black to the master gamma.
[−32]...[+32]
f Factory setting: [0]
Adjusts the gamma characteristic of blue adjacent to black to the master gamma.
[−32]...[+32]
f Factory setting: [0]
Enables/disables the knee function.
[OFF], [ON]
f Factory setting: [ON]
Sets the knee point position.
[60.00]...[100.00] (0.25dB steps)
f Factory setting: [80.00]
Sets the knee slope.
[00]...[199]
f Factory setting: [130]
Enables/disables flare.
[OFF], [ON]
f Factory setting: [ON]
Enables/disables gamma.
[OFF], [ON]
f Factory setting: [ON]
Enables/disables black gamma.
[OFF], [ON]
f Factory setting: [OFF]
Enables/disables knee.
[OFF], [ON]
f Factory setting: [ON]
Enables/disables black white clips.
[OFF], [ON]
f Factory setting: [ON]
Enables/disables the detail.
[OFF], [ON]
f Factory setting: [ON]
Enables/disables the skin tone detail.
[OFF], [ON]
f Factory setting: [OFF]
Enables/disables matrix (linear matrix/12-axis color correction).
[OFF], [ON]
f Factory setting: [OFF]
Enables/disables linear matrix.
[OFF], [ON]
f Factory setting: [OFF]
Enables/disables 12-axis color correction.
[OFF], [ON]
f Factory setting: [OFF]
– 57 –
Description of settings
Description of settings
Advertisement
Table of Contents
