Attaching The Embroidery Frame - Brother ULT-2002D Operation Manual

Attaching the Embroidery Frame

CAUTION
Wind and set the bobbin before attaching the embroidery frame. Use embroidery thread in
the bobbin.
1
2
1
2
5-24
1. Raise the presser foot lever.
2. Align the embroidery frame guide with the right edge
of the embroidery frame holder.
1 Embroidery frame holder
2 Embroidery frame guide
3. While pressing the embroidery frame holder to the left,
slide the embroidery frame into the holder.
1
2
4. Align the projection on the embroidery frame holder
with the groove in the embroidery frame, and return
the embroidery frame holder to the original position.
1 Projection
2 Groove
CAUTION
If the embroidery frame is set in the frame holder
incorrectly, the frame may strike the presser foot,
resulting in injury.
Embroidery
1 —
2 —
3 —
4 —
5 —
6 —
7 —
8 —
9 —