Selecting Patterns From An Embroidery Card - Brother ULT-2002D Operation Manual

Selecting Patterns from an Embroidery Card

1. When the screen at left is displayed, you can insert the embroi-
dery card.
* If a different screen is showing, press
at left.
* Insert the card completely into the slot on the right side of the
machine. Insert the embroidery card so that the end with a printed
arrow is facing the front.
CAUTION
• Only insert or remove the embroidery card when
displayed, or when the machine is turned off.
• Do not insert the card in a direction other than that shown by
the arrow on the card, and do not force the card into the slot
strongly. Do not put any object except for the embroidery cards
into the slot. Otherwise, your machine may be damaged.
2. Press . The patterns on the embroidery card are dis-
played on the selection screen.
3. The method for selecting patterns is the same as that described
on pages 5-8 to 5-16.
CAUTION
Use only embroidery cards intended for use with this machine.
Using other cards may cause your machine to operate incor-
rectly.
Embroidery
to display the screen
1
1 Insert completely.
1 —
2 —
3 —
4 —
5 —
is
6 —
7 —
8 —
9 —
5-17