Connecting Characters - Brother ULT-2002D Operation Manual

Connecting Characters

Follow the steps below when all the characters in the pattern do not fit in the embroidery frame at
once.
Example: Connecting the letters "ABCDE" with "FGHI"
5-56
A B C D E F G H I
1. Enter the letters "ABCDE."
2. Press
3. Press
4. Press the "Start/Stop" button to begin sewing.
5. When sewing is finished, trim the thread, leaving a long
end. Then re-insert the fabric in the embroidery frame,
in a position where you can sew the letters "FGHI."
1 The embroidery end position
1
Embroidery
to move the needle start position to
to turn off automatic thread cutting.
1 —
2 —
3 —
.
4 —
5 —
6 —
7 —
8 —
9 —