Brother ULT-2002D Operation Manual page 99

1
3-26
5. With the presser foot raised, align the presser foot holder
5
screw hole directly with the notch in the side cutter,
then insert the screw and lightly tighten it. Lower the
presser foot lever and firmly tighten the screw.
6. Select a stitch pattern.
If there is an "S" in the bottom of the key display, the
indicated stitch pattern can be sewn with the side cut-
ter.
7. Make a cut of about 20 mm (3/4 inch) in the fabric.
1 20 mm (3/4 inch)
Sewing Utility Stitches
Normal sewing
Zigzag stitch
Overcasting stitch for light and medium weight fab-
rics
Overcasting stitch for heavyweight fabrics
Overcasting stitch for medium and heavyweight stretch
fabrics
1 —
2 —
3 —
4 —
5 —
6 —
7 —
8 —
9 —