Balance Wheel; Presser Foot Lever; Sewing Speed Controller; Bobbin Winder Button - Brother ULT-2002D Operation Manual

Balance Wheel

Presser Foot Lever

1

Sewing Speed Controller

1

Bobbin Winder Button

1-4
Turn the balance wheel to raise or lower the needle. The
1
wheel should be turned toward the front of the machine.
1 Balance wheel
Lower the presser foot lever to lower the presser foot and
apply pressure to the fabric. If the presser foot is raised to
the second position, and you want to sew heavy weight,
stacked fabrics, etc., that are hard to set under the presser
foot, raise the presser foot lever higher and hold it to make
room for the fabric (see page 2-4).
2
1 Presser foot
2 Presser foot lever
CAUTION
The machine will not operate with the presser foot
raised.
Use this controller to adjust the sewing speed. Move the le-
ver to the left to sew at slower speeds. Move the lever to the
right to sew at higher speeds.
1 Lever
Note
Beginners should sew at a slow speed.
1
Use this button to wind the bobbin (see page 1-25).
Setting Up
2
1 Slow
2 Fast
1 —
2 —
3 —
4 —
5 —
6 —
7 —
8 —
9 —