Technical Data; Pp 72/48D Pn; Description - Siemens SINUMERIK 840D sl Equipment Manual

Additional references
For information on commissioning NX components, please refer to the "Commissioning Manual
IBN CNC: NCK, PLC, drive".
9.1.5

Technical Data

Table 9-9
Protection class according to EN 61800-5-1
Degree of protection to EN 60529
Approvals
Pollution degree
Cooling
Mounting position
PE/ground connection
Table 9-10
Input voltage
Current drain (without DRIVE-CLiQ and digital outputs) 0.3 A
Max. permitted output current
Power loss
Dimensions WxHxD (with spacers)
Weight
9.2

PP 72/48D PN

9.2.1

Description

Characteristics
I/O module PP 72/48D PN is a simple module (without a separate housing) for connecting digital
input/outputs as part of an automation system based on PROFINET IO.
The module has the following important features:
• PROFINET IO connection (max. 100 Mbits/s)
• 72 digital inputs and 48 digital outputs
• On-board status display via 2 diagnostic LEDs
NCU 7x0.3B PN
Equipment Manual, 10/2020, 6FC5397-1EP40-6BA1
Safety-related data
Electrical and mechanical data
Connectable components
Class I (with protective conductor system) and
Class III (PELV)
IPXXB
CE, cULus
2
Open-circuit ventilation
Vertical
at the housing with M5 screw Torx / 3 Nm
24 V DC (20.4 – 28.8)
3.35 A
15 W
25 x 414 x 272 mm
2.58 kg
9.2 PP 72/48D PN
99