Siemens SINUMERIK 840D sl Equipment Manual page 158

Spare Parts/Accessories
10.2 CompactFlash Card
3. Carefully insert the new CompactFlash Card
marking
point to one another. When properly installed, the card does not extend beyond the housing.
4. Switch the power supply on again.
Figure 10-2
158
③
provided on the CompactFlash Card is used as orientation: the two arrow heads
①
Blanking plate
②
CompactFlash Card
③
Marking for insertion direction
Inserting the CompactFlash card
②
into the slot until it clicks into place. The
Equipment Manual, 10/2020, 6FC5397-1EP40-6BA1
NCU 7x0.3B PN