Canon JX200 User Manual page 44

You can set the fax to print an activity report only when an error occurs during transmitting. See
<TX REPORT> on page 38.
RX (Reception) Report
Normally the fax does not print an activity report for receiving, but you can set the fax to print an
activity report every time you receive a document. See <RX REPORT> on page 38.
You can set the fax to print an activity report only when an error occurs during receiving. See
<RX REPORT> on page 38.
Multi TX (Transmission) Report
Lists the result of a sequential broadcasting.
If you set the fax to print a <TX REPORT> and then use sequential broadcasting, a MULTI TX
REPORT will be printed instead of a TX (Transmission) REPORT. See <TX REPORT> on
page 38.
Note
A memory clear report is printed automatically when power is restored after a power failure. See
"Memory Clear Report" on page 61.
42 Settings and Activity Reports