Canon JX200 User Manual page 19

2
Squeeze, then slide the Paper Guide to the
left.
3
Insert the stack face up into the Multi-
Purpose Tray (1), and align the right edge of
the stack with the right side of the Multi-
Purpose Tray. Then slide the Paper Guide (2)
snugly against the left edge of the stack.
Be careful not to press the Paper Guide strongly
against the stack, or the paper will not be fed
properly.
4
Adjust the Document Guide to the width of
the document, and gently insert the top of the
document face up into the Document Tray
until you hear a beep.
To avoid feeding problems, make sure the
document meets the document requirements (see
page 15).
Note
For a multipage document, the pages are fed one by one from the top of the stack.
Wait until all pages of your document have been scanned before starting a new job.
Make sure you follow the procedure to load documents into the Document Tray. If the document is not
loaded into the Document Tray correctly, it may not be fed into the fax properly; resulting in a jam, or in
pages not being sent.
If you want to send a document with more than 20 (10 legal-size) pages, divide the document into
sections and send each section in a separate transmission.
For multipage documents, tap the stack on a flat surface to even the edges before loading.
(2)
Before Using Your Machine
(1)
17