Routine Maintenance - Canon JX200 User Manual

Routine Maintenance

Maintenance Menus
The table below shows the available maintenance menus when you press [Maintenance].
Menus
CS CLEANING (see page 50)
NOZZLE CHECK (see page 46)
CLEANING (see page 47)
DEEP CLEANING (see page 47)
ALIGN PRINT HEAD (see page 48)
HEAD ALIGN VALUE (see page 48)
ROLLER CLEANING (see page 51)
BOTTOM CLEANING (see page 51)
Replacing a FINE Cartridge
If there is no improvement with the quality of printing following such maintenance as FINE Cartridge
Cleaning, the FINE Cartridge is probably empty. Replace the empty FINE Cartridge with a new one.
When replacing a FINE Cartridge, check the model number very carefully.
The machine will not print properly if the wrong FINE Cartridge is used, or installed incorrectly.
PG-40 Black
Knowing When to Replace a FINE Cartridge
When Ink is Low
When the ink level is low, the Ink Lamp lights up. In this state the FAX will receive documents to
memory (up to 30 transactions or 60 pages) to prevent the information contained in the FAX from
being lost if the ink runs out completely. You need to print out received faxes manually from the
<MEMORY REFERENCE> menu.
After printing, delete unnecessary faxes from the memory. For more details, see "Documents
Stored in Memory" on page 34.
When Ink is Empty
When the ink is almost empty, the Ink Lamp blinks. When this occurs it may not be possible to
clearly print received faxes from memory. Replace the FINE Cartridge with new one. For more
details, see "Replacing a FINE Cartridge" on page 45.
Printing will resume as soon as the FINE Cartridge is replaced.
PG-50 Black
Routine Maintenance 43