Regulatory Information - Canon BJC-S530D Quick Start Manual

Appendix
Print Head and Ink Tanks
Turning Off the Printer
To avoid printer malfunction always use the POWER button to turn the printer on
and off. Never remove the power cord from the power outlet until you have turned
off the printer by pressing the POWER button. After the POWER lamp goes out, you
can unplug the power cord from the power outlet.
Using the Printer Near Appliances and Fluorescent Lamps
Allow at least 6 inches clearance between the printer and another appliance or a
fluorescent lamp. Electrical noise generated by a fluorescent lamp placed too
close to the printer could cause the printer to malfunction.

Regulatory Information

Color Photo Printer Model: K10216 (S530D)
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is
82
For safety, always store print head and ink tanks out of the reach
of small children. If a child accidentally licks or ingests any ink,
consult a physician immediately.
Never subject a print head or ink tank to shocks or excessive
vibration. Shaking could cause ink to leak and stain clothing and
nearby surfaces.
Never touch the print head or electrical contacts on a print head
immediately after removing it from the printer. These metal parts
become very hot during printing and could cause minor burns.