Canon BJC-S530D Quick Start Manual page 71

Problem Possible Cause
Printer is not Power cable is not
responding securely connected
Printer is not turned on
or is not ready
Computer/printer
needs to be reset
Printer and computer
cabled together
incorrectly
Bad cable
Verify that the power cable is securely connected to the printer
and plugged into a working outlet.
Verify that the POWER lamp is on and glowing a steady green.
If the light is off, press the POWER button. The green light will
blink as the printer is warming up, then go to a steady (no blink)
state when the printer is ready.
If the POWER lamp is blinking green, this indicates that the
printer is warming up or is processing a print job.
If the POWER lamp blinks orange, or green and orange
alternately, see "Handling Error Messages" on page 69.
Reboot the computer and/or reset the printer.
• To reboot, close all open applications, then restart the
computer.
• To reset the printer, turn it off, then back on.
Reconnect the printer cable to the correct port, with the correct
cable. See the "Easy Setup Instructions" in the S530D User's
Guide on the Setup Software & User's Guide CD-ROM.
Ensure that the USB cable is connected directly to the computer,
bypassing any USB hubs.
Replace the printer cable.
Troubleshooting
Try This
67