Canon BJC-S530D Quick Start Manual page 41

View card contents in Explorer: Displays a list of the files stored on the
memory card within Windows Explorer.
Eject the Memory Card: When selected, the indicator lamp starts blinking, a
message will appear, and the printer gets ready for memory card ejection.
When the indicator lamp goes off, press the Eject button and remove the
memory card.
Windows XP/2000: The computer recognizes the card slot as a
removable disk. Therefore, if you want to turn off the printer while
you are using the computer, perform the hardware removal
operation by using the
Change the drive's read/write attribute: Displays the USB Memory Card
Settings dialog box where you can change the mode (Read-only mode, or
Read/write mode) of the card slot by following the on-screen instructions. By
default, the mode is set to Read-only. Be sure to remove the memory card
before changing the mode by using Eject the Memory Card.
Close: Closes the Memory Card Utility.
The following additional options appear on all Windows operating systems
except Windows XP:
Start an application: Starts an application.
Depending on the application, the contents of the
memory card may be displayed.
Auto-start an application when a card is
inserted/Do nothing when a card is inserted:
Determines whether an application will start
each time the memory card is inserted.
You can set the application to be started in advance with the
Auto-Start Properties function.
Do not display this dialog when a card is inserted: When this checkbox is
selected, this screen is not displayed even when a memory card is inserted.
Printing Without a Computer
icon on the right side of the task bar.
37