Canon BJ-20 User Manual page 66

Press the LF/FF switch to select the print style. The buzzer sounds a
3
shorter beep, indicating the change is made.
Press the ON LINE switch to exit the setting mode. The printer
4
becomes online.
Notes
To de-select a style:
Press the ON LINE and PITCH switches simultaneously. The buzzer
1
sounds 3 times and the printer enters the print style setting mode.
Press the PITCH switch the required number of times to move to the
2
desired style.
Press the LF/FF switch to dc-select the print style. The buzzer sounds
3
a long beep, indicating the change is made.
Press the ON LINE switch to exit the setting mode. The printer
4
becomes online.
Using
In BJ-10e
Fonts
Mode
Built-in font:
Only one font is available - Courier. No selection is possible.
Downloaded font:
You must set DIP switch 10 (page 63) to change the buffer
configuration for downloading fonts from your computer.
1
Make sure the printer is turned off.
Set the DIP switch 10 to ON. This changes the download buffer from 0K
2
to 34K.
3
Turn the printer on, and download the fonts from your computer.
In LQ Mode
Built-in fonts:
Eight built-in fonts are available: Roman, Sans Serif, Draft, Courier,
"Printer reset" sets the print style to factory default (i.e. no
print style).
The buzzer gives a beep for each step you make and
sounds 2 times when you are back to "Current Setting".
To combine several print styles, e.g. "Emphasized" and
"Double-wide", just use the PITCH switch to move to the
desired style, and use the LF/FF switch to select it.