Installing Software On Your Computer - Canon imageCLASS MF3110 Software Manual

Installing Software on Your Computer

This section provides installation procedure of drivers to use the MF3110 as a local
1
printer and scanner (connected directly to your computer).
When installing the drivers, follow the steps shown in the [MF3110 Setup] screen.
Before you install the software, be sure to:
•
Confirm the machine is not connected to your computer.
• Turn on the machine. (See the Set-Up Instructions.)
•
Quit any Windows application running on your computer.
IMPORTANT
If you are using Windows 2000/XP, be sure to log on as a member of Administrators. The
full control access right is necessary for the installation of the drivers.
NOTE
•
Use of a cable 9.8 ft (3 m) long or less is recommended.
•
The screen shots shown are from Windows XP.
1
Insert the CD-ROM into your CD-ROM drive.
The [MF3110 Setup] screen appears.
Install the software following steps 1, 2 and 3 in the [MF3110 Setup] screen.
1-4 Installing Software on Your Computer
[MF3110 Setup]