Save Scanned Image - Canon imageCLASS MF3110 Software Manual

Save Scanned Image

You can specify the file name, file format, and location to save the scanned image.
When you select [PDF] as file format, you can also perform detailed settings for the
PDF file.
■ [File Name]
Enter a file name for the scanned image.
If you try to save another file with the same name, four digits starting from 0001 will be
attached after the file name.
■ [Save as Type]
[BMP]
[JPEG]
[TIFF]
[PDF]
The type of file which can be saved with each button is shown below.
[Mail]
[OCR]
[Save]
[PDF]
[Scan-1], [Scan-2]
If you select [PDF] in [Save as Type], depending on the output settings in the Advanced
Mode, an error message may appear indicating that the image size is too large. In such
cases, reduce the [Output Size] and/or [Output Resolution] under [Output Settings] to
reduce the [Data Size] of the scanned file.
If you select [JPEG] in [Save as Type] and then select [Newspaper (B&W)] in ScanGear
MF Simple Mode or [Black and White] in ScanGear MF Advanced Mode, the document
will still be saved in grayscale.
To change the location to save the scanned images, click [Browse] ➞ select a folder ➞
click [OK].
When you scan for the first time, a folder with the scanning date will be created in the [My
Pictures] folder in the [My Documents] folder, and your document will be saved in this
folder. If there is no [My Pictures] folder, a folder with the scanning date will be created in
the [My Documents] folder and your document saved in this folder.
Bitmap format.
JPEG format. Select for grayscale or color images only.
TIFF format.
PDF format. You can make advanced settings with the [PDF
Settings]. For details on [PDF Settings] dialog box, see "Creating One
PDF File from Two or more Pages," on p. 3-15.
BMP JPEG
–
–
TIFF
–
–
– –
MF Toolbox Settings
3
PDF
–
–
3-11