Simple Mode Toolbar - Canon imageCLASS MF3110 Software Manual

[Height] Specifies the height of the output size.
[Unit] Selects the unit of measurement for the output size.
[Add] Adds the output size to the [Output Size List].
[Delete] Deletes the selected output size from the [Output Size List].

Simple Mode Toolbar

With the Simple Mode Toolbar, you can make adjustments to the preview image
and also select a part of the image displayed.
This button is disabled for this model.
(Auto Crop) Crops the image border automatically. For details, see "Advanced Mode
- Specifying the Parameters of a Scan," on p. 3-24.
(Flip) Flips the scanned image horizontally.
(Left Rotate) Rotates the scanned image 90 degrees left.
(Right Rotate) Rotates the scanned image 90 degrees right.
(Information) Lists the scanning information.
■ To Detach and Move the Toolbar
To detach the toolbar from the ScanGear MF dialog box, click and hold on the edge
of the toolbar, then drag the Toolbar. It will return to its original position if you
double-click on the title of the toolbar.
The toolbar will adhere to a position if you drag it to the left or right of the preview
area or the bottom frame.
Setting Preferences and Scanning with ScanGear MF
3
3-21