Making Multiple Copies; Selecting The Paper Feeding Location (Cassette Or Multi-Purpose Tray) - Canon imageCLASS D860 Basic Manual

Making Multiple Copies

You can make multiple copies.
Use the numeric keys to enter the number
of copies you want.
1 0 0 % L T R
T E X T
Ex:
• The LCD displays the number of copies you
entered.
• You can make up to 99 copies.
Selecting the Paper Feeding Location
(Cassette or Multi-purpose Tray)
When making copies on paper which cannot be loaded in the cassette, such as thick paper, transparencies, labels,
envelopes, tracing paper, etc., you can use the multi-purpose tray.
• The settings changed in the Additional Functions are not returned automatically to the settings you set
previously. Change to the previous settings again if necessary.
NOTE
Press Paper Select to select the paper
feeding location (cassette or multi-purpose
tray).
1 0 0 % T R A Y #
T E X T
Ex:
:If you select a paper type other than PLAIN
PAPER in MP PAPERTYPE. (→ p. 4-4)
#:If you set HIGH COPY MODE to ON. (→ p. 4-4)
■ Specifying the Paper Size
At the factory the paper size has already been set to FREE SIZE. Normally, you can make copies in this
setting. However, when the copy images or the back of the paper is dirty, you can prevent the paper from
getting dirty by specifying the paper size according to the following.
• To set the Additional Functions, see "Accessing the Additional Functions". (→ p. 7-1)
NOTE
– To specify the paper size every time you load the paper: Press Additional Functions, then
select COMMON SETTINGS → MP TRAY PAPERSIZE → OFF → SET ON LOADING.
05
A 4 01
• You can reserve the next copy job while the
machine is outputting copies. (→ p. 4-11)
NOTE
• The LCD keeps on displaying the specified
number of copies until copying finishes.
When the auto clear function activates, the
LCD returns to standby display and the
number of copies returns to 01 (factory
default setting).
• When making copies on LTR-size paper
after having continuously copied on paper
NOTE
smaller than LTR-size paper, the copies
may have marks. To prevent, wait about
one minute before making copies.
• When making copies of a small size or
thick paper*, etc., the copy speed may be
slower than usual.
* The paper type should be selected in
ADDITIONAL FUNCTIONS.
• If you intend to make a copy and print with a
thermal transfer printer on one sheet of paper,
make the copy first. Failure to do so may
make mark copies or cause a paper jam.
• When copying onto transparencies, remove
each transparency from the output tray as it
is output.
4
4-3