Table of Contents
Advertisement
■ Grayscale Settings
Clicking [Grayscale Settings] in the [Quality] tab sheet opens the [Grayscale Settings] dialog box. This
dialog box enables you to control the brightness and contrast of images. This function is enabled only
when [Manual Grayscale Setting] is selected in the [Quality] tab sheet (see p. 3-11). Two tab sheets are
provided in this dialog box.
■ Grayscale Adjustment Tab
3
3-12
Windows 98/Me Properties
[Resolution]
Selects the printer's resolution in dot per inch (600 dpi or 300 dpi).
[B & W Halftones]
Selects a halftone pattern.
[Enable Image Correction]
Corrects the roughness of image and inaccuracy in interpolating when
printing an enlarged image in low-resolution.
Selects the setting for saving the toner consumption ([Printer Default], [Off],
[Toner Save]
or [On]).
Displays the image with the currently selected brightness and contrast
[Preview]
reflected.
[Original]
Displays the original image.
Adjusts the brightness of the preview image in the range between –5 and
[Brightness]
5.
[Contrast]
Adjusts the contrast of the preview image in the range between –5 and 5.
[Restore Defaults]
Resets all the current settings to their default values.
Advertisement
Table of Contents
