Table of Contents
Advertisement
■ Custom Paper Size Settings
Clicking [Custom Paper Size] in the [Page Setup] tab sheet opens the [Custom Paper Size Settings]
dialog box. This dialog box enables you to define custom paper sizes for quick selection and register
new custom paper sizes to the [Paper List] box. You can specify the name, width, and height of each
size. Up to 50 custom paper sizes can be defined.
3
NOTE
You cannot register new custom paper sizes when the [Canon L180/L380S/L398S Properties] or the [Canon
LC310/L390/L408S Properties] dialog box is opened from a Windows application.To register the custom paper
size, follow the steps in "From the [Printers]," on p. 3-2 and perform the procedure above.
3-8
Windows 98/Me Properties
[Color]
Selects the font color of the watermark.
Adds the frame to the watermark. You can select the frame type ([Circle],
[Border]
[Rectangle], or [None]).
[Print Style]
Selects the type of watermark ([Transparent] or [Overlap]).
[Print on First Page Only]
Prints the selected watermark only on the first page of the document.
Displays the paper sizes actually available. Selects a paper size from which
[Paper List]
you can create a custom paper size.
[Name of Custom Paper Size]
Specifies the name of custom paper.
[Unit]
Selects the unit of measurement of paper size ([Millimeter] or [Inch]).
[Paper Size]
Specifies the width and height of the custom paper.
NOTE
Be sure that [Width] does not exceed [Height] when specifying the values.
[Register]
Registers the custom paper and adds its name to [Paper List].
[Delete]
Removes the selected custom paper from [Paper List].
NOTE
You cannot delete a pre-defined paper size.
Advertisement
Table of Contents
