Mounting And Detaching A Lens - Canon EOS 1D Mark II N Instruction Manual

Mounting and Detaching a Lens

Mounting a Lens
Detaching the Lens
When attaching or detaching the lens, take care to prevent dust from
entering the camera through the lens mount.
1
Remove the caps.
Remove the rear lens cap and the
body cap by turning them as shown
by the arrow.
2
Attach the lens.
Align the red dots on the lens and
camera and turn the lens as shown
by the arrow until it snaps in place.
3
On the lens, set the focus mode
switch to <
If it is set to <
be possible.
4
Remove the front lens cap.
While pressing the lens release
button, turn the lens as shown by
the arrow.
Turn the lens until the red dot is at the
top, then detach the lens.
f
>.
g
>, autofocus will not
29