Canon EOS 1D Mark II N Instruction Manual page 35

6
Using the <
6
The < > dial is mainly used for shooting-related settings. There are
three ways to use this dial:
> Dial
(1) While pressing a button, turn the
6
<
setting appears on the top LCD
panel.
When you release the button, the
selected setting takes effect and the
camera will be ready to shoot.
In this way, you can set the shooting
mode, AF mode, metering mode,
drive mode, etc.
(2) After pressing a button, turn the
6
<
When you press a button, its function
remains selected for 6 seconds (
During this time, you can turn the <
dial to set the desired setting. After the
button turns off or if you press the shutter
button halfway, the camera will be ready
to shoot.
In this way, you can select the AF
point or press the <
the exposure compensation amount.
(3) Turn the <
While referring to the top LCD panel, turn
the <
In this way, you can set the shutter
speed, aperture, etc.
> dial until the desired
> dial.
6
> dial only.
6
> dial.
Basic Operation
9
).
6
O
> button to set
35
>