Custom Function Settings - Canon EOS 1D Mark II N Instruction Manual

3

Custom Function Settings

C.Fn-03 is unused.
C.Fn-01
0: No viewfinder display
1: Finder display on
Displays the exposure information and number of remaining shots during
continuous shooting.
C.Fn-02
0: Possible without card
1: Not possible
The shutter button will not work without a memory card in the camera. This
prevents shooting without a memory card.
If there is no memory card and you press the shutter button, "Card" will blink on
the top LCD panel and in the viewfinder. It indicates that C.Fn-02-1 is in effect.
C.Fn-04
0: AF/AE lock
1: AE lock/AF
You can focus at one location and obtain AE lock at another location in the
scene. Press the <
halfway to attain AE lock.
2: AF/AF lock, no AE lock
In the AI Servo AF mode, you can press the <
operation momentarily. This prevents the AF from being thrown off by any
obstacle passing between the camera and subject. The exposure is set at
the moment the picture is taken.
3: AE/AF, no AE lock
This is useful for subjects which keep moving and stopping repeatedly. In
the AI Servo AF mode, you can press the <
Servo AF operation. The exposure is set at the moment the picture is taken.
Thus, the focusing and exposure will always be at the optimum point as you
wait for the decisive moment.
C.Fn-04 and C.Fn-19-0/1/2 (p.168) both have AF start/stop and AE lock
functions. If you have set both these Custom Functions and you execute both
Custom Function operations, the latter operation will not work. The only
exception will be when AF stop is executed after AF start.
Finder display during exposure
Shutter release without card
Shutter button/AE lock button
w
> button to autofocus and press the shutter button
w
> button to stop the AF
w
> button to start or stop the AI
161