Canon EOS 1D Mark II N Instruction Manual page 148

SPrinting with Bubble Jet Direct
If [Bordered] is set, the date might be imprinted on the border, depending
on the printer.
If [Date] is [On], the date recorded for the image will appear on the print.
The date will appear on the lower right of the image.
If you select [Stop] during the printing, the picture being printed will stop
printing and the paper will be discharged.
If a problem occurs during printing, an error message will appear on the
camera's LCD monitor. Select [Stop] or [Continue]. If you select
[Continue] and the printer does not resume printing, it will resume
automatically after you resolve the problem.
If you are using a BJ printer equipped with an operation display panel,
the error No. will be displayed if an error occurs. To resolve the
respective error, refer to the BJ printer's instruction manual.
148
7
Start printing.
Select [Print].
The printing will start.
When the printing ends, the screen
will return to step 1.
To stop the printing, select [OK] while
[Stop] is displayed.