Mounting and Detaching a Lens
Mounting a Lens
Remove the caps.
• Remove the rear lens cap and the
camera body cap.
Mount the lens.
• Align the red dots on the lens and
camera and turn the lens as shown
by the arrow until it snaps in place.
On the lens, set the focus mode
switch to <AF>.
• If the focus mode switch Is set to
<MF>
(or
<M>
on older lenses),
autofocus will not operate and <[i!iQ>
will
be
displayed on the LCD panel.
Remove the front lens cap.
Detaching the Lens
While pressing the lens release
button, turn the lens as shown by
the arrow.
• When the red dot on the lens is at the
top, remove the lens.
0 . Keep the removed caps where you will not lose them.
• "AF" stands lor Autofocus.
• "MF" (or "M") stands for Manual Focus.
20