Record Raw+Jpeg Images Separately (Raw+Jpeg Separate Recording) - Canon EOS 1D Mark II N Instruction Manual

Setting the Folder and Memory Card
Record RAW+JPEG Images Separately
When the image size is set to 1+3/4/5/6 (RAW+JPEG), you
can save the RAW image to the CF card (f) and the JPEG image to
the SD card (g) (or vice versa).
When shooting with "Dual image recording" or "RAW+JPEG separate
recording" set, make sure the CF card and SD card both have enough
space remaining.
Before shooting, check that the following is displayed on the rear LCD panel:
"Dual image
recording"
If "RAW+JPEG separate recording" is set and the image size is not set to
RAW+JPEG, it will be the same as "Dual image recording".
When "Dual image recording" or "RAW+JPEG separate recording" is set,
the images will be saved in the respective memory cards under the same
file number in the same-numbered folder.
To make it easier to find the images, creating a new empty folder to save
captured images is recommended.
The number of remaining shots displayed on the top LCD panel will be
based on the memory card having less remaining capacity.
When [BackUp] is set, a folder having the same folder number might be
created automatically in both the CF card and SD card.
If either one of the memory cards becomes full, shooting will not be
possible.
You cannot move or copy images between the two cards.
74
(RAW+JPEG separate recording)
Select [f: RAW g: JPEG] or [f:
1
JPEG g: RAW].
Follow step 3 on page 73 to select
[f: RAW g: JPEG] or [f: JPEG
g: RAW].
2
Set the image size to RAW+JPEG.
(p.52)
"RAW+JPEG
separate recording"