Switching to the Registered AF Point
Normally, you press the <
to switch to the registered AF point. However, with C.Fn-18-1/2 (p.168),
you can just press the <
Set Custom Functions with
If you set or cancel C.Fn-13, the center AF point will become the
registered AF point. This does not apply if you change C.Fn-13-1 to
C.Fn-13-2 or vice versa.
If C.Fn-18-1/2 and C.Fn-04-1/3 are also set, you can just press the <
button to switch to the registered AF point and activate the autofocus at
the same time.
Registering and Switching the AF Point
P
> button and <
P
> button to switch to the registered AF point.
3
n
<
>.
(1) Press the <
button simultaneously.
This is the default method.
(2) Press only the <
switch to the registered AF point.
C.Fn-18-1
(3) Switch to the registered AF point
only while pressing the <
button.
C.Fn-18-2
When you release the <
the camera will return to the original
AF point.
S
> button simultaneously
P
> button and <
P
> button to
(p.168)
(p.168)
P
S
>
P
>
> button,
P
>
85