Canon EOS 1D Mark II N Instruction Manual page 164

3 Custom Function Settings
C.Fn-09
You can change the AEB sequence when the pictures are bracketed
with the shutter speed or aperture and the file-saving sequence for
white balance bracketing (WB-BKT).
When "Auto cancellation" is set, bracketing will be canceled after you
change the lens or turn the <
0: 0, -, +/Auto cancellation
1: 0, -, +/No cancellation
The first bracketed shot is the standard exposure (or exposed with the
standard white balance). This bracketing sequence can be repeated.
2: -, 0, +/Auto cancellation
Starts the bracketing sequence with the minus (or bluish or magenta bias)
setting.
3 -, 0, +/No cancellation
Repeats the bracketing sequence starting with the minus (or bluish or
magenta bias) setting. This bracketing sequence can be repeated.
AEB
0 : Standard exposure
- : Decreased exposure - : More blue
+ : Increased exposure + : More amber
C.Fn-10
0: On
1: Off
The AF point does not light at all. Effective when it is bothersome to see it
light up.
2: On without dimming
The selected AF point will not be dimmed.
3: Brighter
Effective when the AF point lighting is difficult to see with C.Fn-10-0.
164
Auto bracketing sequence/cancel
4
> switch to <
B/A Bias
0 : Standard white balance
AF point illumination
2
>.
WB bracketing
M/G Bias
0 : Standard white balance
- : More magenta
+ : More green