Table of Contents
Advertisement
Wire list
QCAD129/NT9J93xx
This chapter provides information required to build cables of nonstandard
lengths for Digital Trunk Interface (DTI) applications. For installation of a
private T1 transmission cable, consult Northern Telecom's Transmission
Division.
The following pages contain lists and descriptions applying to Digital Trunk
Interface (DTI) cables external to the Meridian 1 cabinet.
This cable is used to connect the RS-232-C interface for an Echo Canceller to
the DTI card.
Table 17
Standard length 7 ft (2.1 m)
Construction
22 AWG (0.644 mm), stranded
P1 Connector
15-pin, male, subminiature D, with jack-screws
P2 connector
25-pin, male, subminiature D, with jack-screws
contains the QCAD129/NT9J93xx wire list.
DTI/CPI Installation and data administration
Page 57 of 66
Advertisement
Table of Contents
