HP Open View Installation And Maintenance Manual page 64

Configuring Hosts and Storage Arrays
10. Open Disk Administrator on the host. Verify that the additional disk space appears at the
11. Open the WinZip file that contains the diskpart utility. Select the utility and click
12. Open a command prompt window on the host.
13. Go to the directory in which you installed the diskpart utility. If you used the default
14. Enter the following command:
15. At the diskpart> prompt, enter:
16. To select the LUN you want to expand, enter:
Note:
correct LUN.
17. Enter the following command:
18. Open Disk Administrator on the host. Verify that the LUN is a Basic disk and reflects the
64
end of the LUN you want to expand.
Actions > Install to install the utility on the host.
directory, go to c:\program files\resource kit.
diskpart.exe
List Volume
select volume #
You can run the List Volume command again to ensure you have selected the
Extend
The following message is displayed:
Diskpart Successfully Extended the Volume
newly expanded size.
Continuous Access Storage Appliance Installation and Maintenance Guide