Table of Contents
Advertisement
Logging Points in Continuous Mode
On the
tab, select the
Surv
function. Two different modes
vals
are possible: Time or Distance (see
figure opposite).
If you choose
Distance
zontal and vertical increment value
respectively in the
according to the chosen unit, in the
field. If you choose
Value
the increment value, in seconds.
Enter a point Id. for the start point in
the
Starting Pt Number
will increment after each point log-
ging. You do not need to define a
name finishing with a figure. FAST
Survey will place one anyway when incrementing this field.
Press
to switch to the graphic screen (see figure below) and to start logging the
OK
first point.
The
button lets you instantly log the position of a point. The
S
to pause data logging in continuous mode. If data logging in continuous mode is
paused, you can still continue to log points in manual mode using the
the
button again (changed into a right arrow during pause) to resume data logging
X
in continuous mode. If you come back to the main menu by clicking on
data logging in continuous mode is automatically stopped.
Point Id.
incremented
automatically
24
Auto by Inter-
, enter the hori-
and
fields,
X/Y
Z
, enter
Time
field. This field
button allows you
X
button. Click
S
, then
MENU
Used to log a point's
position manually
Used to pause/re-
sume data logging
Advertisement
Table of Contents
