Table of Contents
Advertisement
4. Post-Processing Surveying
Static Mode
In this mode, the receiver is installed and operated at a stationary point throughout
the logging sequence.
Click on the
tab and select the
function. If no data logging is in
Surv
Log Static Data
progress, a menu (figure 30) is then displayed on the handheld computer's screen.
Otherwise, you should first stop the data logging sequence in progress by clicking
on the
button.
Close File
Select
and then enter the logging parameters (elevation mask, default=5°;
Start File
data logging interval, from 0.1 to 999 seconds) (figure 31).
Check that the antenna height value is correct, otherwise change it by clicking on
the
button.
Change Antenna
Click
to start a new data logging sequence. To stop logging data, click on the
OK
button.
Close File
Figure 30- Static surveying main menu
Figure 31- Logging parameters
28
Advertisement
Table of Contents
