Table of Contents
Advertisement
To remove the card, first unmount it from the device:
A.
Slide up from the bottom of the Home screen and tap Settings.
B.
Tap Storage
Then gently push the top edge of the card inwards to release it, and pull it out of the slot.
C.
4.
Replace the battery pack and the battery cover. (Follow the steps in the "Installing and Charging the
Battery Pack" section.)
Do not apply pressure to the center of the memory card.
Inserting the card in the reverse direction may cause damage.
The manufacturer does not guarantee the product's compatibilities with the storage cards from all manufacturers.
If you encounter access problems with your memory card, please visit the website
https://www.sdcard.org/downloads/formatter_4/ and use the "SD Memory Card Formatter 5.0 for SD/SDHC/SDXC" tool to
format your memory card.
Turning the Device On and Off
Turning On
1.
Press and hold the Power button for about 2 seconds to turn on your device. Wait for the boot screen
to display.
The battery may not be fully charged when you use the device for the first time. Charge the battery first.
2.
The Home screen will display and the device is in Lock mode by default. Drag the Lock icon ( )
upwards to unlock. The device is ready for use.
Sleep Mode
Your device will automatically switch off the screen after 1 minute (by default) of inactivity. You can
manually switch off the screen by pressing the Power button briefly.
..
Advertisement
Table of Contents
