Table of Contents
Advertisement
6. Click
to send these parameters to the Z-Max receiver. A new menu appears
OK
asking you to enter the initialization position for the base. Several options are
possible to enter this position as prompted on the screen (figure 10).
7. Choose the option that suits you and enter this position. When you are done
with entering the base position, FAST Survey then displays the WGS84 coordi-
nates of this position (figure 11), after making the transformation to WGS84 if
necessary.
8. Click the
button. FAST Survey then asks you to enter a point ID (4 charac-
Yes
ters max.).
9. Enter a Point ID and click
to verify the radio parameters or not.
10.Click
to display the current radio parameters (see figures 12 and 13). In the
Yes
US, a channel/frequency table will be shown. In Europe, a single channel will
be displayed along with the corresponding frequency.
Figure 10- Entering base coordinates
Figure 12- Thales Navigation Radio Parame-
. Then FAST Survey asks you whether you want
Yes
Figure 11- Base position in WGS84 coordinates
Figure 13- Pacific Crest Radio Parameters
13
Advertisement
Table of Contents
