Table of Contents
Advertisement
Chapter 3. Installing an Analog Modem
Terminal Emulation Modem Disable
When using HyperACCESS or other terminal emulation package
issue the AT command AT_L0 (followed by Enter). Figure 3-6
illustrates a HyperACCESS session disabling an external analog
modem.
If carrier detect (CD) is active (a call is connected) on the external
analog modem when attempting to disable it, the Express XRT will not
switch control from the modem port. The call must be hung-up
(disconnected) to deactivate CD.
3 6
HyperACCESS: Disabling an External Analog Modem
Express XR/XRT Quick Start Guide
Figure 3-6
61200.153L1-13
Advertisement
Table of Contents
