Table of Contents
Advertisement
Chapter 2. Installation
4.
Check the power and the cable connections then select the
Auto-Detect button. If the error message shown in
Figure 2-5 is displayed again, see the chapter Troubleshooting.
5.
Choose Wizard under the Configuration tab.
6.
Read the screen instructions and click NEXT.
7.
Verify the unit information and the COM port to which it is
connected are shown correctly; choose NEXT.
8.
Enter the area code and ISDN phone numbers provided by
the ISDN service provider. Since the ADTRAN Express XR/
XRT supports an Automatic SPID and Switch Detection
algorithm, this is all the information required.
9.
Click NEXT.
1 6
Express Configuration Wizard Connection Tab
Express XR/XRT Quick Start Guide
Figure 2-6
61200.153L1-13
Advertisement
Table of Contents
