ADTRAN XR Quick Start Manual page 73

S58 ... CALL ................... Allows the Express XR/XRT to screen incoming
SCREENING
SS60 SPID1 LOC ......... SPID string location.
SS61 SPID2 LOC ......... SPID string location.
SS62 LDN1 LOC .......... ISDN phone number string location.
SS63 LDN2 LOC .......... ISDN phone number string location.
S65 ... AUTOSPID ........ Sets the AutoSpid determination feature.
SS67 AREA CODE ...... Area code location.
S71 ... DTE RATE .......... Selects the DTE connector bit rate.
S72 ... DATA BITS ........ Selects the number of asynchronous data bits.
S73 ... DTE PARITY ...... Selects the number of asynchronous parity bits.
S74 ... DTE STOP .......... Selects the number of asynchronous stop bits.
S75 ... DTE FLOW ......... Selects asynchronous flow control.
61200.153L1-13
Appendix A. AT Commands and S-Registers
calls.
0 = Answer any call
1 = Answer only calls from numbers matching
those stored in SN0 through SN9.
0 = Disable (default)
1 = Enable
3 = 1200
6 = 2400
8 = 4800
11 = 9600
15 = 19200
17 = 38400
20 = 57600
23 = 115200
25 = 230400
0 = 8 bits
1 = 7 bits
0 = None
1 = Odd
2 = Even
0 = 1 stop bit
1 = 1.5 stop bits
2 = 2 stops bits
0 = None
1 = XON/OFF from DTE controls DCE
2 = XON/OFF from DCE controls DTE
Express XR/XRT Quick Start Guide
6 1